OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P27E8

Transmission Range Control B Circuit Performance

P27E8 is the plausibility test for range control circuit B: the signal is neither open nor shorted, yet its value makes no sense, for example a level stuck between the valid on and off windows. The title reads Circuit Performance, without Range. No manufacturer publishes the code. Mitsubishi's 2022 shift-by-wire CVT shows the A version, P07E9: a selector sensor voltage sitting for 2.4 s in a forbidden band (such as 2.12 to 2.67 V) counts as a fault, with no fail-safe action because the other sensors still identify the position. A second channel would be judged the same way. Contact resistance, moisture in the selector or an aging Hall element are the likely sources. Open, low and high are P27E7, P27E9 and P27EA.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / E8

Possible causes

  • Contact resistance at selector terminals shifting the voltage high
  • Spilled drink or moisture inside the selector medium
  • Position sensor in the selector degrading medium

Symptoms

  • Intermittent shift system warning
  • Displayed range occasionally flickers or lags

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P27E8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication