P27E7
Transmission Range Control B Circuit/Open
'Transmission Range Control' belongs to shift-by-wire, where the selected range travels as an electrical signal instead of a cable. Only channel A is documented in public: Mitsubishi's 2022 manual sets P07E8 when one of eight electric shift sensors in the selector rises above 4.5 V for 2.4 s with the ignition on, and names no fail-safe reaction. A B channel, which P27E7 would cover, is not described by any manufacturer, so P27E7 is best read as the same open-circuit test on a second, redundant circuit. GM's internal range selection uses a separate set of B codes, P27EF to P27F2, for its valve position sensor. Inspect selector connector and harness; the vehicle may refuse some ranges or shift to park only.
Possible causes
- Loose or corroded connector at the electric selector high
- Broken wire between selector and control module medium
- Sensor inside the selector assembly failed open medium
Symptoms
- Warning about the shift system in the cluster
- Some ranges not accepted from the selector
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27E7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.