P27DE
Pressure Control Solenoid T Control Circuit Range/Performance
P27DE would be set if the circuit of solenoid T is intact but delivers readings the controller considers implausible. No manufacturer documents the code. For the selector pilot valve of the TR9070, Ford's 2024 summary knows just three electrical faults, namely open load, shorted load and shorted switch, and GM checks the comparable Corvette pilot valve under its own K-block codes. CARB 13 CCR 1968.2 prescribes the general circuit and function monitoring for such actuators. Where a module does use P27DE, it hints at a gradual change rather than a clean break: a terminal with rising contact resistance, a coil whose resistance has crept away from nominal, or an output stage in the TCM that no longer regulates current properly.
Possible causes
- Rising contact resistance at a terminal high
- Solenoid T resistance drifted from nominal medium
- TCM output no longer regulating current low
Symptoms
- MIL on
- Hesitant or inconsistent gear selection
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27DE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.