P27DD
Pressure Control Solenoid T Control Circuit/Open
P27DD tells that the control circuit of solenoid T is open, so no current reaches the coil. Ford's 2024 OBD overview gives this code to open load on the selector pilot valve of the TR9070 dual-clutch transmission; the document lists the fault type only, without limits. How such a test usually works is shown by GM for the corresponding pilot valve of the Corvette, there coded P282D: with the output off, a sense voltage stuck in the 1.7 to 3.0 V window for 100 ms reveals the missing load (23OBDG07). A dead pilot valve leaves the selector in its rest position, so the synchronizer valves can only reach one group of rods. A displaced terminal, a broken lead or a burnt winding are the usual finds.
Possible causes
- Displaced terminal in the connector high
- Broken lead to solenoid T medium
- Burnt-through winding of solenoid T medium
Symptoms
- MIL on
- Only some gears selectable
- Fallback mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27DD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.