P27DC
Pressure Control Solenoid T Intermittent
With P27DC the module reports that solenoid T misbehaved only briefly before working again. No maker has published a description of this code. Ford's TR9070, the only known application of a valve T (selector pilot valve, 2024 overview), is covered by lasting electrical codes and by stuck-on and stuck-off codes, none of them sporadic. CARB 13 CCR 1968.2 requires the transmission actuators to be monitored. Because the selector pilot valve decides which rods the shift valves reach, even a short dropout can make a gear selection fail or arrive late. Freeze-frame data showing temperature and road conditions at the moment of the fault help more than a single resistance check in the workshop.
Possible causes
- Loose pin in the gearbox connector high
- Particles briefly holding the valve spool medium
- Harness rubbing through under vibration low
Symptoms
- MIL lights up from time to time
- Occasional failed or late gear selection
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27DC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.