P27DB
Pressure Control Solenoid T Electrical
P27DB is a catch-all for electrical trouble on solenoid T that does not name the kind of fault. No manufacturer publishes it. The only known valve T is the selector pilot valve of Ford's TR9070 dual-clutch gearbox, and Ford's 2024 overview splits that valve's wiring faults into P27DD for open load, P27DF for a shorted switch and P27E0 for a shorted load instead of using this code. GM's Corvette has a comparable pilot valve but numbers it under the K block (P282D to P2830). CARB 13 CCR 1968.2 demands circuit monitoring of transmission actuators in general. Diagnosis follows the detailed codes: coil ohms, connector pins, harness insulation, then the TCM.
Possible causes
- Solenoid T coil open or shorted high
- Corrosion or poor fit at the gearbox connector medium
- Defective TCM output for solenoid T low
Symptoms
- MIL on
- Restricted gear choice
- Limp mode possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27DB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.