P27D9
Pressure Control Solenoid T Performance/Stuck Off
P27D9 is logged when solenoid T fails to build the pressure it is asked for. Ford's 2024 OBD overview for the TR9070 dual-clutch gearbox assigns it to the selector pilot valve (SELPV) when that valve stays hydraulically off. That pilot valve moves the selector valve, which decides which shift rods the synchronizer valves SPV1 to SPV4 act on; Ford keeps separate codes for the selector valve and the whole selector mechanism (P178D, P178B). No thresholds are published. GM's Corvette dual-clutch box has the same kind of valve but files its stuck-off fault under P2829, not P27D9. If the selector cannot switch, part of the gear set is unreachable. Fluid level, contamination and the pilot valve itself are the first checks.
Possible causes
- Selector pilot valve stuck closed high
- Low or contaminated transmission fluid medium
- Selector valve spool binding in its bore low
Symptoms
- MIL on
- Several gears unavailable
- Gearbox in fallback mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27D9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.