P27D3
Pressure Control Solenoid S Electrical
P27D3 reports an electrical problem with pressure control solenoid S without saying which kind. No manufacturer publishes this code. GM, the only maker known to fit a fifth synchronizer valve (Corvette dual-clutch, 23OBDG07 and 24OBDG07), monitors that valve with separate codes from the S block: P27D5 open load, P27D7 short to ground and P27D8 short to battery, current error or a short to a neighbouring output found at shutdown, all Type A. P27D3 would therefore come from a controller that does not differentiate. CARB 13 CCR 1968.2 calls for circuit checks on transmission actuators. Check the coil, connector and harness first.
Possible causes
- Solenoid S coil open or shorted high
- Corroded or loose connector at the transmission medium
- Damaged wiring between TCM and solenoid S medium
Symptoms
- MIL on
- Gears on rod 5 unavailable
- Limp mode possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27D3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.