P27D2
Pressure Control Solenoid S Stuck On
With P27D2 the TCM concludes that solenoid S applies pressure that was never requested. GM is the only maker publishing it, for shift solenoid 5 of the Corvette dual-clutch gearbox (23OBDG07, carried over to 24OBDG07). Because valve 5 serves rod 5 on its own, there is no partner rod to relax; instead the trigger is far larger: rod 5 must drift 4,000 µm or more within 200 ms after the selector valve changes position although its force target is zero. The result is Type A with the MIL. Ford's four-valve TR9070 does not have the code. Expect the gears on rod 5 to be blocked and possibly a harsh engagement or a fallback mode.
Possible causes
- Spool of solenoid S jammed open high
- Particles keeping valve S from venting medium
- Worn armature or seat in solenoid S low
Symptoms
- MIL on
- Harsh engagement or clunk
- Gears on rod 5 blocked, fallback mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27D2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.