P27D1
Pressure Control Solenoid S Performance/Stuck Off
P27D1 flags pressure control solenoid S as unable to produce force. Only GM documents it publicly: in the Corvette dual-clutch tables 23OBDG07 and 24OBDG07 it is shift solenoid 5, the only one of these valves serving a single rod, rod 5, which it moves in both directions depending on the selector position. If the intrusive integrity routine sees 100 µm or less of travel on rod 5 while valve 5 is applied, the fault is stored as Type A. Ford's TR9070 has just four synchronizer valves, so the code does not appear there. Gears carried on rod 5 become unavailable; fluid condition, a sticking spool or a leak in the rod actuator are the first things to check.
Possible causes
- Spool of solenoid S sticking closed high
- Low or worn-out transmission fluid medium
- Leak at the rod 5 actuator piston medium
Symptoms
- MIL on
- Gears on rod 5 unavailable
- Gearbox in substitute mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27D1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.