P27CF
Pressure Control Solenoid R Control Circuit Low
P27CF tells that the control line of solenoid R is held low, as if shorted to ground. On the Corvette dual-clutch transmission GM (23OBDG07, still present in 24OBDG07) monitors synchronizer actuation valve 4 while energized; the driver chip compares the sense pin with a threshold of roughly 1.7 V and, after 150 ms below it, reports a ground fault rated Type A. Ford's TR9070 list gives P27CF to a shorted switch on SPV4. A ground short bypasses the driver, so the valve can apply rods 3 and 4 towards A when no shift is wanted; the controller then usually locks the affected gears. Chafed insulation, a crushed harness clip or a coil shorted to its housing are typical finds.
Possible causes
- Chafed insulation grounding the control line high
- Harness crushed at a clip or bracket medium
- Solenoid R coil shorted to its housing low
Symptoms
- MIL on
- Unwanted rod movement, gears locked out
- Limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27CF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.