P27CE
Pressure Control Solenoid R Control Circuit Range/Performance
P27CE would be stored if the control circuit of solenoid R stayed electrically connected yet produced values that make no sense to the controller. No manufacturer documents this code publicly. On the Corvette dual-clutch transmission GM checks valve 4 for a mismatch between commanded and estimated current (over 70 % for 60 ms, or 400 mA for 300 ms in 23OBDG07), but that check reports P27D0. Ford's 2024 list for the TR9070 likewise offers only open load, shorted load and shorted switch for SPV4. CARB 13 CCR 1968.2 sets the general monitoring duty. Typical reasons would be rising contact resistance, a solenoid with partly shorted turns, or a weak TCM driver output.
Possible causes
- Rising contact resistance in the circuit high
- Solenoid R with partly shorted turns medium
- Weak TCM driver output low
Symptoms
- MIL on
- Shift feel varies on rods 3 and 4
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27CE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.