P27CA
Pressure Control Solenoid R Stuck On
P27CA is the stuck-on fault of solenoid R, GM's shift solenoid 4 on the Corvette dual-clutch transmission. The detection in 23OBDG07 mirrors that of valve 3 because both valves share rods 3 and 4, only with opposite pushing direction: a selector change followed by an uncommanded jump of one rod of at least 1 mm inside 200 ms plus a 0.125 mm relaxation of its partner points to valve 4 holding pressure. The check runs continuously, rated Type A, and is retained in 24OBDG07. Ford pairs the code with SPV4 of the TR9070. A valve that cannot vent tends to leave a rod loaded, which may show up as gear grinding or a protective lock-out of gears.
Possible causes
- Spool of solenoid R jammed open high
- Debris lodged in valve R preventing venting medium
- Internal wear of solenoid R armature or seat low
Symptoms
- MIL on
- Grinding or clunk when changing gears
- Gears locked out by the controller
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27CA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.