P27C6
Pressure Control Solenoid P Control Circuit Range/Performance
P27C6 describes a control circuit for solenoid P that is neither open nor shorted but behaves outside its expected range, for example current that does not track the command. No manufacturer documents this code publicly. GM does run such a plausibility test on synchronizer actuation valve 3 of the Corvette dual-clutch unit (23OBDG07), comparing the estimated current with the target, yet assigns a failure to P27C8, not to P27C6; Ford's TR9070 table has no range code for SPV3 either. CARB 13 CCR 1968.2 expects functional or at least circuit monitoring of automatic transmission solenoids. Suspects are a winding whose resistance changes with temperature, corroded contacts adding resistance, or unstable supply voltage.
Possible causes
- Coil resistance drifting with temperature high
- Corroded contacts adding series resistance medium
- Unstable TCM supply voltage low
Symptoms
- MIL on
- Inconsistent shift quality on the affected rods
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27C6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.