P27BB
Pressure Control Solenoid N Electrical
P27BB is a catch-all electrical code for pressure control solenoid N, and no manufacturer documents it publicly. The two makers known to use solenoid N, GM on the Corvette dual-clutch unit (23OBDG07) and Ford on the TR9070, both split electrical faults of this synchronizer valve into separate codes instead: P27BD covers an open load, P27BF a grounded line and P27C0 a line shorted to battery voltage. A controller with a less detailed driver stage could report all of these under P27BB. CARB 13 CCR 1968.2 requires circuit monitoring of such output components. Checks therefore cover coil resistance, connector pins inside the transmission and the harness to the TCM.
Possible causes
- Solenoid N coil open or shorted high
- Corroded or loose internal transmission connector medium
- Damaged harness between TCM and transmission medium
- Faulty output driver in the TCM low
Symptoms
- MIL on
- Gears served by solenoid N unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P27BB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.