OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P27B4

Internal Control Module Transmission Gear Direction Control Performance

P27B4 concerns the direction in which the vehicle actually moves compared with the selected gear. GM's 2024 heavy-duty TCM tables compare the direction reported by the output speed sensor with the direction implied by solenoid and pressure switch states; disagreement for one second sets the code with MIL on the first trip. Ford's 2024 summary splits it into unintended launch (UDS P073D_48) and wrong driving direction (P073F_48), listed as non-MIL on eight- and ten-speed automatics. Despite that listing, Ford bulletins report a MIL and point to software: TSB 20-2074 for 2020 Super Duty trucks with 6.2 or 7.3 L petrol engines and the 10R140, TSB 20-2336 for the 6.7 L diesel, and TSB 26-2096 for the 2022 F-150 Lightning, where the wrench light comes from the SOBDMC.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / B4

Possible causes

  • Module software strategy (Ford reprograms PCM or SOBDMC) high
  • Faulty direction information from the output speed sensor medium
  • Solenoid or pressure switch reporting a state that does not match the gear low

Symptoms

  • MIL or wrench light
  • Forced idle or reduced power
  • Gear engagement blocked until restart

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P27B4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication