OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P27B2

Internal Control Module Transmission Range Control Performance

P27B2 is set when the monitoring layer cannot confirm that the gearbox is really in the range the main software intends. In GM's 2024 tables for heavy-duty trucks, the TCM checks actual solenoid and pressure switch states with the pattern expected for the range; if they disagree for a full second, the code is logged, lighting the MIL on the first trip. Ford's 2020–2024 summaries treat it as a non-MIL fault on cars with electronic shifting, recognised in less than 3 s. Ford bulletins tie it to electronic shifter events: SSM 47877 (Navigator 2018/19 and Nautilus 2019, stuck in park after R or D was chosen from remote start without braking), SSM 49642 (Explorer and Aviator built for 2020/21, park release used in the plant) and TSB 25-2362 (2023–2025 Escape and Corsair hybrids, 2025 Maverick hybrid, MIL from SOBDMC software).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / B2

Possible causes

  • Module software (Ford fixes by reprogramming, e.g. TSB 25-2362) high
  • Unusual operating sequence such as selecting a gear after remote start without braking medium
  • Solenoid or pressure switch state not matching the commanded range medium

Symptoms

  • Vehicle stuck in park or will not start
  • Warning lamp or transmission message
  • Range change refused

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P27B2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication