P27B0
Pressure Control Solenoid K Data Incompatible
P27B0 closes the data-incompatible series with letter K, and no public manufacturer document uses it. It would describe a tenth pressure control solenoid whose calibration record in the transmission controller is missing, mismatched or corrupt. For comparison, GM's 2020 table checks the records of valves A to H once per power-up and rates failures Type A; the ten-speed there needs only eight such valves. CARB 13 CCR 1968.2 is the legal basis for monitoring such output components. Practically, a workshop would treat K like its siblings: confirm the valve body ID, load the matching data and clear the code. A broken coil or wiring would produce circuit codes instead, not this data fault.
Possible causes
- Valve K data never programmed into a new or used TCM high
- Valve body ID in the TCM differs from the fitted unit medium
- Software update overwrote or damaged the data block low
Symptoms
- MIL on
- Shift quality problems on gears using valve K
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27B0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.