OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P27AE

Pressure Control Solenoid H Data Incompatible

P27AE is the highest letter GM publicly checks for characterization data. It is absent from the 2016 eight-speed table and first appears in 17OBDG04, where H stands for the nine-speed's C6 clutch (C6789) and the ten-speed's torque converter clutch; 20OBDG04 adds mode valve B on CVTs with electronic range select. The test is identical to its siblings: one pass at TCM initialization, failure if the data are absent, of another device class, fail their checksum or show decreasing axis points, then Type A after one trip. On a ten-speed, wrong data for H mainly shows up as poor or shuddering lock-up. Since only the data are at fault, a dealer-level download, not a mechanical repair, normally ends it.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / AE

Possible causes

  • Replacement TCM delivered blank and not set up with valve body data high
  • Valve body or solenoid service without data update medium
  • Corrupted solenoid H data block low

Symptoms

  • MIL on
  • Shudder or missing converter lock-up on ten-speed units
  • Higher fuel consumption if lock-up is suppressed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P27AE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication