P27AD
Pressure Control Solenoid G Data Incompatible
P27AD flags the stored data for pressure control solenoid G as not matching the hardware. GM's 2016 eight-speed table names G the torque converter clutch solenoid and sets the code in one trip. In the 2017 to 2020 tables G is clutch C5 (C57R) on the nine-speed, the line pressure valve on the ten-speed and, only on CVTs with electronic range select, mode valve A; there it is a Type A fault checked at controller start. The 2025 table 25OBDG03A no longer lists G, ending its characterization checks at F. When the line pressure valve of a ten-speed is affected, shift feel can change across all gears. Reloading the valve body data with a scan tool is the usual repair.
Possible causes
- Solenoid G data missing after TCM programming high
- Valve body changed without matching data high
- TCM calibration for a different transmission variant low
Symptoms
- MIL illuminated
- Converter clutch or range mode problems, depending on transmission
- General shift harshness on ten-speed units
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27AD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.