P27AB
Pressure Control Solenoid E Data Incompatible
Solenoid E's characterization data failing the TCM's plausibility test produces P27AB. In GM's 2018 table 18OBDG04 the record is written at vehicle assembly according to the valve body part number and must be rewritten by the dealer whenever the valve body is serviced; a missing or partial block, a device class mismatch, a checksum error or falling axis values all count as failures (Type A, one trip). Valve E is clutch 5 (C45678R) on the 2016 eight-speed, clutch C3 (CB38) on the nine-speed, clutch C4 on the ten-speed and the converter clutch on the CVT. The solenoid itself may be perfect; what is wrong is the table the controller uses to drive it, so harsh or flared shifts can appear.
Possible causes
- Valve body serviced without rewriting the solenoid data high
- Incomplete programming session after TCM replacement medium
- Solenoid class in the data does not match the TCM calibration low
Symptoms
- MIL lit
- Flare or bump on shifts using the clutch behind valve E
- On the CVT, irregular torque converter lock-up
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27AB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.