P27A8
Pressure Control Solenoid B Data Incompatible
With P27A8 the TCM rejects the stored characterization record of pressure control solenoid B. GM's 2016 eight-speed table 16OBDG03 ties B to clutch 2 (CB12345R) and logs the code within one trip when that record is marked as not programmed. From 2017 on (17OBDG04, 18OBDG04, 20OBDG04) the letter stands for the converter clutch valve of the nine-speed, clutch C2 of the ten-speed and the primary pulley of GM's CVT, checked once during controller initialization and rated Type A. A blank or mismatched block nearly always follows a module swap or valve body job where the part-number-based download was skipped. Expect the MIL; lock-up or shift quality may suffer until the data are written.
Possible causes
- Characterization download skipped after TCM or valve body replacement high
- Data loaded for the wrong valve body part number medium
- TCM non-volatile memory corrupting the stored block low
Symptoms
- MIL illuminated
- Converter lock-up shudder or no lock-up on the nine-speed
- Uneven upshifts involving the affected clutch
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P27A8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.