OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P27A6

Electric/Auxiliary Transmission Fluid Pump B Stuck On

P27A6 reports that auxiliary pump B keeps running, or keeps drawing current, while the controller has it switched off. Audi lists P27A600 in bulletin 34-17-25 for 2017 A4, A5 and A6 and 2018 Q5 models with 0CJ, 0CK and 0CL dual-clutch gearboxes; there the code may appear together with a rattle from the gear oil pump V553, which Audi traced to an assembly fault at the supplier and cures with a new pump. More generally, a pump that will not stop points to its own control electronics, a driver or relay that remains closed, or a control wire shorted to voltage, the case covered by P27A5. On pump A the same fault is P27A1. Apart from noise, a pump that never rests drains the 12 V battery and wears out early.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / A6

Possible causes

  • Pump B module or electronics defective (e.g. Audi V553 supplier fault) high
  • Driver output or relay remains closed medium
  • Control line shorted to battery voltage low

Symptoms

  • Pump noise or rattle from the gearbox area with the engine off
  • Weak or flat 12 V battery
  • Transmission warning stored

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P27A6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication