OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P27A3

Electric/Auxiliary Transmission Fluid Pump B Performance/Stuck Off

P27A3 means auxiliary pump B was commanded but did not deliver: no pressure build-up, too little speed or a motor that does not respond at all. Audi documents the code. Its bulletin 34-17-25, revision 3 from 2017, covers model year 2017 A4, A5, A6 and the 2018 Q5 with the 0CJ, 0CK and 0CL seven-speed twin-clutch boxes and names P27A300, next to P27A6, P276B and U28A0, as possible companions of a rattling gear oil pump V553; a supplier assembly defect was the cause, and the pump is renewed with new bolts. For pump A the matching code is P2797, which GM's 2025 CVT tables set when both pulley pressures stay below 200 kPa during an engine auto-start. Mechanical seizure, low fluid or a weak motor are typical; stop-start goes offline.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / A3

Possible causes

  • Pump B mechanically defective or seized (e.g. assembly fault on Audi V553) high
  • Fluid level too low, pump draws air medium
  • Worn pump motor or high resistance in its supply medium

Symptoms

  • Rattle from below the car near the gearbox
  • Stop-start disabled
  • Delayed or harsh engagement after an engine restart

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P27A3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication