OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2789

Clutch A Adaptive Learning at Limit

P2789 says the controller has pushed its learned fill or pressure corrections for a clutch to the edge of the permitted window and still cannot reach the shift quality it aims for. The code is well documented by Allison for its 1000/2000 Series automatics, where it lights the Check Transmission lamp and the Prognostics view flags the affected clutch as not OK. Tech tip TT8008EN covers Thomas Built school buses whose natural-gas Cummins ISB engines report torque inaccurately, causing flares on the first two upshifts (C3/C4); TT7994 covers IC Bus models with a PSI 8.8 litre propane engine making more torque than expected (C3); SIL 34-1K2K-19 describes low-mileage units with C1 at its limit and calls for B191 or newer TCM software. In dual-clutch boxes P278F is the clutch B sibling.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 89

Possible causes

  • Outdated transmission calibration needing a reflash high
  • Engine reports torque inaccurately, so clutch adaptation drifts medium
  • Worn clutch plates or leaking clutch piston seals medium
  • Degraded fluid or a sluggish pressure control solenoid low

Symptoms

  • Check Transmission or warning lamp on
  • Engine flare or slip during upshifts
  • Harsh or delayed engagement of the affected clutch

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2789

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication