OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2788

Auto Shift Manual Adaptive Learning at Limit

P2788 is the system-level code for an automated manual gearbox whose learned correction values have reached the end of their allowed range. Such units learn the clutch bite point, engagement speed and the end stops of the shift and select movements so that gear changes stay smooth as parts wear; when a value would have to move beyond its limit, the controller can no longer compensate and stores this code. No manufacturer documents P2788 publicly; it falls under the comprehensive component rules of CARB 13 CCR 1968.2. Allison's bulletins on the related P2789 show the usual route: check whether engine torque data are plausible and whether newer software exists before replacing parts. Also check clutch wear, actuator travel and whether a relearn was skipped after repair. P2789 and P278F are the clutch-specific versions.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 88

Possible causes

  • Worn clutch moving the bite point beyond the learnable range high
  • Basic setting or relearn skipped after clutch, actuator or module work medium
  • Worn or sticking shift and clutch actuators changing their travel medium
  • Outdated software or implausible engine torque signal low

Symptoms

  • Jerky take-off and harsh or slow shifts
  • Transmission warning lamp
  • Clutch slip or engine flare during shifts

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2788

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication