P2784
Input/Turbine Speed Sensor A/B Correlation
P2784 belongs to transmissions with two input or turbine speed sensors whose readings can be compared. When both are healthy their values agree, or differ only by a known ratio; P2784 is set when they drift apart for longer than the module tolerates while each circuit on its own looks fine. No manufacturer documents P2784 publicly, so it stays open which sensor pairs are compared in practice. The individual circuits have their own codes: P0715 family for sensor A and P2765 to P2768 for sensor B. Mitsubishi's 2019 CVT shows how sensor B can be the turbine sensor, diagnosed when it reads below 150 rpm for 5 s while the primary pulley turns faster than 500 rpm. Metal debris on a magnetic tip, a loose sensor or a damaged tone wheel are typical causes.
Possible causes
- Metal debris on a magnetic speed sensor tip high
- One sensor giving a weak or distorted signal medium
- Damaged tone wheel or excessive air gap low
- Signal interference from poor shielding or connectors low
Symptoms
- Harsh or erratic shifts
- Emergency mode with fixed gear
- MIL on
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2784
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.