OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P277C

Electric/Auxiliary Transmission Fluid Pump B Motor Stalled

P277C means the motor of auxiliary pump B is commanded to turn but stands still or nearly so. Volvo uses it: its technical journal 36774 covers 2024–2027 mild-hybrid S60, S90, V60/V90 Cross Country, XC40, XC60 and XC90 models with the Aisin TG-81SC eight-speed, where the TCM stores P277C07. If the code shows up only intermittently, no warning appears and stop-start still works, Volvo says to clear it and not to replace anything. Confirmed with a warning and dead stop-start, gearboxes built before serial 25M8L30144 are replaced, while later units go to engineering support first. Ford's pump A equivalent is P0C2A, which its 2024 summary links to a pump that may have lost prime. A jammed impeller or seized bearing is the classic cause.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 7C

Possible causes

  • Jammed impeller or seized pump bearing high
  • Known hardware issue in early gearboxes (Volvo TG-81SC before the serial break) medium
  • Pump lost prime because of low fluid medium
  • One-off detection without a real fault low

Symptoms

  • Transmission warning message in the cluster
  • Stop-start not working
  • Shifts too early, too late or erratic

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P277C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication