P2777
Upshift Switch Circuit High
P2777 is the over-voltage counterpart for the upshift switch. GM's 2023 twin-clutch TCM watches the TAPUP input and counts up a timer once it exceeds 4.774 V; after 150 ms above that limit, with supply voltage in the 8.75–18 V band, the code is logged as Type C, so no MIL. Ford's July 2024 OBD summary lists P2777 as out-of-window-high on the TR9070 upshift paddle. Because the released paddle already rests near the top of the range, an open signal circuit, a missing switch ground or a disconnected steering wheel plug pushes the reading over the limit quickly. A short to battery voltage is less common. P2776 is the opposite case, P2775 the implausible but in-range one. The paddle does nothing until the circuit is repaired.
Possible causes
- Open signal or ground circuit, steering wheel connector loose high
- Broken track in the clock spring medium
- Signal wire shorted to a voltage source low
Symptoms
- Upshift paddle without function
- Driver information message about manual shifting
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2777
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.