P2775
Upshift Switch Circuit Range/Performance
P2775 covers an upshift paddle or tip switch whose voltage is electrically possible but belongs to neither of its two legal states. GM's twin-clutch TCM tables for 2023 and 2024 read the plus paddle as an analogue input: pressed should give 2.2–3.52 V, released 3.826–4.744 V. If the voltage sits outside both windows for 120 s, P2775 sets as Type C, so without MIL. Ford's 2024 summary for the TR9070 twin-clutch gearbox lists P2775 as illegal voltage on the upshift paddle input. Contact wear, moisture or a resistor drifting inside the switch are the usual reasons. A paddle held too long belongs to P0815, readings beyond the band to P2776 or P2777. Manual shifting by paddle is normally disabled.
Possible causes
- Worn or dirty contacts or drifting coding resistor in the paddle high
- Added resistance in the clock spring or steering wheel connector medium
- Moisture or spilled liquid in the switch low
Symptoms
- Upshift paddle has no effect, manual mode unavailable
- Message on the cluster, normally no check engine light
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2775
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.