OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2772

Four Wheel Drive (4WD) Low Switch Circuit Range/Performance

P2772 flags a low-range switch whose signal is electrically valid but does not fit what the drivetrain is actually doing. No manufacturer documents P2772 publicly. The natural cross-check is the one GM describes under P2771: the control unit derives the active range from turbine or input speed, output speed and the resulting ratio, then compares that with the switch. A switch reporting low while the ratio shows high, or a switch that never changes after a range shift, fits this code. Root causes are mostly mechanical: a worn shift fork or encoder, a switch out of adjustment, or a speed signal disturbed by shaft play. CARB requires such rationality checks for inputs to monitored systems. The driver may see a flashing 4WD lamp or find low range unavailable.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 72

Possible causes

  • Low-range switch or encoder worn or out of adjustment high
  • Range shift not completed (shift fork, actuator or linkage) medium
  • Output or turbine speed signal distorted, so the calculated range is wrong medium

Symptoms

  • Flashing 4WD indicator or range message on the cluster
  • Low range refused or engaged only after several attempts
  • Warning light depending on manufacturer

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2772

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication