OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P276E

Electric/Auxiliary Transmission Fluid Pump B Motor Current Low

P276E tells you that the motor of a second electric transmission fluid pump, called B, takes less current than its commanded duty would require. A small draw usually means the motor is not really working: a broken winding, worn brushes, extra resistance in the feed or ground, or an impeller spinning freely because it has no fluid to move. No manufacturer documents P276E publicly. Ford shows the same check for pump A in its 2024 OBD summary for the 10R60/10R80 and 8F57 gearboxes, where an under-current reported by the pump becomes P0C27 (UDS P0C26_18). What pump B is depends on the car; Audi names the gear oil pump V553 on its 0CJ, 0CK and 0CL twin-clutch units. P276F covers the opposite case. Expect stop-start to be withheld while the fault is present.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 6E

Possible causes

  • Worn brushes or open winding in the pump B motor high
  • Corroded connector or high-resistance feed/ground to the pump medium
  • Low fluid level so the impeller runs without load medium
  • Faulty current measurement in the pump controller or TCM low

Symptoms

  • Check engine or transmission warning lamp
  • Engine stop-start no longer operates
  • Delayed or harsh drive engagement after an engine restart

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P276E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication