OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P276A

Electric/Auxiliary Transmission Fluid Pump B Motor Supply Voltage Circuit/Open

P276A means the power feed to the motor of a second electric transmission fluid pump, labelled B, is interrupted. Such pumps keep hydraulic pressure or lubrication alive when the engine-driven pump is idle, for instance during stop-start or in a dual-clutch gearbox. No manufacturer documents P276A publicly. Audi shows what pump B is in bulletin 34-17-25 for the 2017 A4, A5, A6 and 2018 Q5 with seven-speed dual-clutch units 0CJ, 0CK and 0CL: the gear oil pump V553, which reports supply faults to the TCM under P276B00. CARB requires such actuators to be checked for open circuits. A blown fuse, a corroded pump connector or a broken supply wire are typical; with the pump dead the gearbox may restrict stop-start or limit performance.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 6A

Possible causes

  • Blown fuse in the pump supply high
  • Corroded or oil-contaminated pump connector medium
  • Broken supply wire or relay contact medium

Symptoms

  • Transmission warning lamp
  • Stop-start deactivated
  • Reduced performance or limp mode in some designs

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P276A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication