OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P275B

Transmission Fluid Temperature Sensor D Circuit Range/Performance

P275B is the rationality code for sensor D: the circuit is electrically sound, yet the value does not behave like real fluid temperature. Published tests on other fluid sensors show what modules look for – a warm-up check (GM's 2025 TCMs expect the main sensor to pass 15 °C within a calibrated time), a stuck-value check and a rate check against impossible jumps, such as Mitsubishi's rejection of 10 °C changes within 80 ms on its dual-clutch sensor B. Which of these a maker applies to D is not documented publicly, and no manufacturer lists P275B. Ageing of the thermistor, a contact with added resistance or oil sludge on the sensor tip can all produce a believable but wrong reading.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 5B

Possible causes

  • Sensor D thermistor aged or slow high
  • Added resistance in a contact medium
  • Sludge or deposits on the sensor tip low

Symptoms

  • Warning lamp after repeated detection
  • Temperature D lags behind or deviates from the other readings

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P275B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication