P275A
Transmission Fluid Temperature Sensor D Circuit
P275A flags an electrical fault in the circuit of transmission fluid temperature sensor D, the fourth position in the SAE lettering. A gearbox with four separate fluid temperature inputs is rare, and no manufacturer publicly assigns sensor D or describes when P275A is stored. CARB requires every such powertrain input to be checked for interrupted circuits and for values beyond the sensor span. The general circuit code fits modules that cannot or do not distinguish between an open and a short; where they can, P275C and P275D apply. Diagnosis follows the usual path: read the live value of D next to the other temperature readings, inspect the connector, then measure the resistance of sensor and lead.
Possible causes
- Fault in connector or lead of sensor D high
- Sensor D electrically defective medium
- Module input stage faulty low
Symptoms
- Warning lamp
- Temperature D missing or implausible on the scan tool
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P275A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.