P274F
Transmission Fluid Temperature Sensor C Over Temperature Condition
P274F means sensor C reports a plausible value that is nevertheless above the overheat limit set in the calibration. It is a condition report rather than a circuit defect, and no manufacturer documents its threshold or the location of sensor C publicly. For the main sensor the equivalent is P0218, which Saab's Aisin gearbox stores at over 170 °C held longer than 10 s. Depending on where C measures – for example at a clutch pack or in a cooler line – the trigger may be a heavily loaded clutch or a restricted oil flow rather than overall sump heat. Expect protective measures such as torque limits or a changed shift pattern; let the unit cool, then check fluid level, condition and the cooling circuit.
Possible causes
- High load or heavy clutch slip high
- Restricted oil flow or clogged cooler medium
- Low or worn-out fluid medium
- Sensor C reading too hot within range low
Symptoms
- Overheating warning
- Limited torque or altered shifting
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P274F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.