OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P274D

Transmission Fluid Temperature Sensor C Circuit High

P274D is set when the sensor C signal climbs above its highest permitted value. On a thermistor supplied with 5 V via a resistor, that happens when the circuit opens – a broken wire, a corroded or unplugged connector – or when the signal line touches a voltage source; the display would then show fluid colder than any real climate produces. No manufacturer documents P274D publicly. For the main sensor, Ford's 2012 strategy uses above 4.6 V, and GM's 2023 dual-clutch module above 4745 mV for its sump sensor, both as electrical limits rather than temperatures. Until the fault is cleared the transmission may keep a cold-fluid strategy with delayed converter lock-up or more cautious clutch control.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 4D

Possible causes

  • Open circuit in sensor C lead or connector high
  • Signal lead shorted to voltage medium
  • Sensor C open internally low

Symptoms

  • Warning lamp
  • Temperature C shows an extremely cold value
  • Late converter lock-up or cautious shifting

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P274D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication