P274C
Transmission Fluid Temperature Sensor C Circuit Low
P274C indicates that the sensor C signal has fallen below the lowest value the module accepts. With the negative-temperature-coefficient thermistors normally used for fluid temperature, a low voltage corresponds to very hot fluid, so the usual culprit is a signal lead touching ground or a sensor with an internal short; real heat rarely drives the reading that far. No manufacturer publishes P274C with a threshold. As orientation, Ford's 2012 strategy flags its main sensor below 0.05 V held for 5 to 12 s. Note that some makers, such as Mitsubishi on sensor B, define low by the computed temperature instead, which reverses the meaning. The module then discards C and works with a replacement value.
Possible causes
- Signal lead of sensor C shorted to ground high
- Internal short in sensor C medium
- Control module input faulty low
Symptoms
- Warning lamp
- Temperature C shows an extremely hot value
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P274C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.