OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P274A

Transmission Fluid Temperature Sensor C Circuit

P274A is the general circuit code for a third transmission fluid temperature sensor, labelled C. Few gearboxes carry three fluid sensors, and no manufacturer publicly documents which measuring point C stands for or what limits apply to P274A. CARB obliges the module to detect broken circuits and readings outside the possible span on such inputs. By analogy with the main sensor, the module watches a thermistor fed through a pull-up resistor and stores this code when the circuit fails without stating whether it is shorted or open; makers that split the fault use P274C/P274D. A substitute value from another sensor normally keeps the car drivable, though temperature-dependent adaptation and protection functions may be restricted.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 4A

Possible causes

  • Connector or lead to sensor C damaged or corroded high
  • Sensor C failed electrically medium
  • Control module input stage faulty low

Symptoms

  • Warning lamp
  • Implausible value for temperature C on the scan tool
  • Restricted adaptation or protection functions

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P274A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication