OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2744

Transmission Fluid Temperature Sensor B Circuit Intermittent

P2744 covers brief dropouts or jumps in the sensor B signal that do not last long enough for the steady low or high codes. No manufacturer documents P2744 publicly; the makers that do use sensor B (GM and Ford dual-clutch units, Mitsubishi Twin Clutch SST) file erratic readings under P2741 instead. By analogy, Ford's 2012 strategy for the main sensor names P0714 alongside open, short and in-range checks. CARB requires such inputs to be watched for wiring faults and for readings beyond their scale. Practical causes are a loose terminal in the gearbox connector, a chafed lead near hot or moving parts, or corrosion that only acts under vibration or heat. The fault often vanishes at the workshop, so freeze-frame data and wiggle tests matter.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 44

Possible causes

  • Loose or spread terminal in the transmission connector high
  • Harness to sensor B chafing on hot or moving parts medium
  • Moisture or corrosion in the connector low

Symptoms

  • Warning lamp that comes and goes
  • Short spikes in fluid temperature B on the scan tool

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2744

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication