P2742
Transmission Fluid Temperature Sensor B Circuit Low
P2742 reports that the sensor B signal sits below its valid range, and how low is defined differs by maker. GM's 2023/24 dual-clutch TCM treats a cooler temperature sensor value under 200 mV, with hysteresis, for at least 500 ms as too low, Type B; for the usual NTC thermistor that equals an extremely hot reading or a signal wire shorted to ground. Ford's TR9070 lists P2742 as the out-of-window-low test of its cooler-out sensor. Mitsubishi's 2009 Twin Clutch SST instead relates Low to the computed temperature: −40 °C or colder for 400 ms, naming the transaxle-integrated unit as suspect. Real overheating with a sound sensor belongs to P273F. Afterwards the module ignores sensor B and uses a substitute.
Possible causes
- Signal lead of sensor B chafed through and touching ground high
- Sensor B shorted internally medium
- Control unit with built-in sensor faulty (Mitsubishi TC-SST) low
Symptoms
- Warning lamp after two trips on GM
- Scan tool shows sensor B extremely hot (GM, Ford) or extremely cold (Mitsubishi)
- Protective strategy with substitute temperature
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2742
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.