P2740
Transmission Fluid Temperature Sensor B Circuit
P2740 is the umbrella circuit code for a second transmission fluid temperature sensor, labelled B. The control module supplies the thermistor with a reference voltage and flags an electrical fault when the returned signal leaves its plausible window, without separating short from open. Where B is documented, it sits outside the sump: Ford's TR9070 dual-clutch gearbox and a GM dual-clutch module of 2023/24 both use it for the fluid leaving the cooler, but report electrical faults through the split codes P2742/P2743 rather than P2740. No manufacturer publishes P2740 itself. Without a valid B value the module relies on sensor A or a default, so cooler control and hot-fluid protection get coarser; shifting usually remains normal.
Possible causes
- Loose, corroded or damaged connector or lead to sensor B high
- Sensor B thermistor open or shorted internally medium
- Faulty input stage in the transmission control module low
Symptoms
- Warning lamp or transmission message
- Fluid temperature B shows an implausible fixed value on the scan tool
- Cooler or hot-fluid protection works with a substitute value
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2740
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.