OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P273F

Transmission Fluid Temperature Sensor B Over Temperature Condition

P273F is a condition code, not a wiring fault: sensor B delivers a valid reading, but that reading lies above the overheating limit the calibration allows. No manufacturer publishes P273F or its threshold. The analogous code for sensor A is P0218; Saab's Aisin automatic, for instance, sets it once the fluid stays above 170 °C for over 10 s. Where sensor B measures the oil leaving the cooler, as on GM and Ford dual-clutch units, a high value hints that the cooler itself is no longer removing heat. Typical reactions are a warning message, reduced torque or an altered shift and clutch strategy. Look for towing or track use, low fluid, a blocked cooler or a failed cooler valve before suspecting the sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 3F

Possible causes

  • Sustained high load – towing, track use, long climbs high
  • Fluid cooler clogged or cooler valve not opening medium
  • Fluid level low or fluid aged medium
  • Sensor B reading too hot while still in range low

Symptoms

  • Transmission overheating message
  • Reduced torque or changed shift pattern
  • Burnt-smelling or darkened fluid

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P273F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication