OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P273E

Gear Shift Control Module A Over Temperature

P273E is a condition code: the gear shift control module A – the shift-by-wire selector unit – reports that its internal temperature exceeds the safe limit. No manufacturer documents P273E or its threshold publicly. Heat in such a unit can come from outside, for example a console exposed to strong sun or a module mounted near the exhaust tunnel, or from inside, when driver stages for lock solenoids, motors or illumination draw too much current. Because a hot module may give wrong position data, it typically reduces its functions; the vehicle may refuse range changes or hold Park until the unit cools. A code that returns at normal temperatures suggests an internal defect, while one tied to heat waves points to cooling or mounting.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 3E

Possible causes

  • Internal fault or overloaded output stage in the selector module high
  • High ambient or radiant heat at the module location medium
  • Shorted lock solenoid or actuator driven by the module low

Symptoms

  • Selector warning, functions limited
  • Range changes refused until the module cools

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P273E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication