OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P273C

Gear Shift Control Module A Supply Voltage Low

Gear shift control module A is the electronic selector used where the gearbox is shifted by wire – lever, rotary knob or push buttons – which turns the driver's choice into a message for the transmission control module. P273C means the supply voltage that this module sees, or reports, has fallen below its lower limit. No manufacturer documents P273C or its threshold publicly. A weak supply matters because a selector that resets or browns out can no longer confirm P, R, N or D; the gearbox then keeps its range or refuses to leave Park. Stellantis shows how sensitive these modules are: for a rotary selector stuck in Park, its 2022 case advised pulling and refitting fuse F94 to restart the module. Check battery, fuse, feed and ground first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 3C

Possible causes

  • Weak or discharged 12 V battery, voltage dips at start high
  • Corroded fuse contact, feed wire or ground of the selector module medium
  • Alternator or DC/DC converter not supplying enough voltage medium
  • Internal fault in the gear shift module low

Symptoms

  • Selector warning, range cannot be changed
  • Vehicle will not shift out of Park
  • Gear indicator flickers or goes blank

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P273C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication