OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P273B

Transmission Friction Element H Apply Time Range/Performance

P273B is the apply-time check for an eighth shift element, H, and therefore only applies to gearboxes with at least eight clutches and brakes. The test is the same as for its siblings: the time between command and full engagement is compared with a calibrated window, and a result outside it sets the code. No manufacturer documents P273B publicly. Ford's 2012 OBD summary notes that its newer automatics report clutch faults through solenoid stuck-on/stuck-off codes instead of the older element codes, which shows these generic apply-time codes are optional for a maker. CARB still expects transmission controls to be monitored where they affect emissions. Element H shares nothing with P273A except the method; mixing up the letters across gearboxes leads to the wrong part being replaced.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 3B

Possible causes

  • Pressure loss in the apply circuit of element H (seals, valve body) high
  • Slow-responding valve controlling element H medium
  • Worn friction plates of element H medium

Symptoms

  • Delayed or harsh shifts involving element H
  • MIL lit
  • Transmission in fail-safe mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P273B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication