OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P273A

Transmission Friction Element G Apply Time Range/Performance

P273A carries the apply-time test of P2700 to P2705 on to a seventh shift element, G. The controller measures how long element G needs from command to full engagement and stores the code if this time is implausibly long or short. Only gearboxes with more than six clutches and brakes need a letter G, and no manufacturer documents P273A publicly. Ford shows how the series is used: its 10R80 bulletins (from 21-2315 onward) list apply-time codes up to P2705 for element F and none beyond, and Ford's 2012 summary explains that a ratio check cannot tell a valve fault apart from other faults in that clutch circuit. CARB requires monitoring of automatic transmission controls. A slow G apply can mean worn plates, leaking piston seals or low pressure; the driver feels flare or harsh shifts.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 3A

Possible causes

  • Leaking piston seals in the apply circuit of element G high
  • Pressure control or shift solenoid feeding element G sticking medium
  • Worn plates or wrong clearance of element G medium
  • Adaptive shift values out of range after repair or software update low

Symptoms

  • Engine flare or harsh shift into gears using element G
  • MIL lit, possibly with ratio codes
  • Fail-safe gear operation

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P273A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication