P2736
Pressure Control Solenoid F Control Circuit/Open
P2736 points to an open control circuit on solenoid F, meaning the coil path is interrupted. GM documents the code for several gearboxes. On the eight-speed of 2016 valve F is the line pressure solenoid, and an open-circuit flag for 0.3 s within 0.5 s sets the fault in one trip. In 25OBDG03A the same valve drives clutches on the nine- and ten-speed or switches the CVT's binary pump, and an impedance above 200 kOhm to ground over the same window is a Type A fault. The Corvette dual-clutch TCM tests its clutch cooling valve while switched off and flags open load at a sense voltage of roughly 1.7 to 3.0 V for 150 ms. Ford's TR9070 uses P2736 for open load on the odd clutch cooling valve. Line pressure faults usually bring a limp mode.
Possible causes
- Broken wire or pushed-back terminal high
- Valve body connector not fully seated medium
- Open winding in solenoid F medium
- Internal TCM fault low
Symptoms
- MIL on and limp-home mode
- Firm shifts from maximum line pressure or missing gears
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2736
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.