OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2735

Pressure Control Solenoid F Intermittent

By its standard title P2735 reports that solenoid F or its circuit fails only now and then, so a static check in the workshop often finds nothing. GM uses the code differently on the dual-clutch gearbox of the 2023 and 2024 Corvette: there valve F is the clutch cooling valve, and P2735 stands for a stuck lube valve. The TCM triggers a current-profile test on the valve during stable driving with fluid at 60 °C or warmer and a cooling flow target below 3 l/min; if the result keeps indicating failure, it sets the code. GM rates it Type C, so it does not switch on the MIL. Other makers do not document P2735 publicly. Intermittent wiring or connector faults on valve F are the generic reading, while the Corvette case points to the cooling valve itself.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 35

Possible causes

  • Clutch cooling/lube valve sticking (GM Corvette dual-clutch) high
  • Loose or corroded connector causing dropouts medium
  • Contaminated fluid affecting valve movement medium
  • Harness chafing that opens under vibration low

Symptoms

  • Often no noticeable symptom, code stored without MIL (GM)
  • Occasional harsh shift or clutch judder
  • Clutch overheating warning after hard driving

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2735

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication