OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2734

Pressure Control Solenoid F Electrical

P2734 is the catch-all electrical code for solenoid F: the driver stage notices coil current or voltage at odds with the command, without saying whether the line is broken, touching ground or touching battery voltage. Public documentation of P2734 by any maker is lacking. Those that publish data on valve F use the specific circuit codes instead: GM's 2025 table 25OBDG03A runs P2736, P2738 and P2739 on the same valve, which there feeds a clutch of the nine- or ten-speed, the line pressure circuit of the eight-speed or the binary pump of the CVT. Ford's 2024 summary maps the odd clutch cooling valve of its TR9070 dual-clutch unit to the same three codes. CARB counts such solenoids as comprehensive components whose circuits must be checked for faults.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number7 / 34

Possible causes

  • Corroded, loose or damaged connector at the valve body high
  • Chafed or broken wire in the solenoid F circuit medium
  • Faulty solenoid F coil medium
  • Faulty output stage in the TCM low

Symptoms

  • MIL on with limp-home mode
  • Harsh, late or missing shifts

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2734

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication